Paint Protection Film Roll Overview
Applied to vehicle body. 8.5mil TPU Paint Protection Film with self healing, UV & stain resistance. Choose low‑tack or high‑gloss grade.Parameter Comparison
| Parameter | PPF03 | PPF06 |
|---|---|---|
| Thickness | ≥ 8.5 mil | ≥ 8.5 mil |
| Elastic Modulus | ≤ 350 Kgf/cm² | ≤ 500 Kgf/cm² |
| Elongation at Fracture of Coating | ≥ 100% | ≥ 100% |
| Initial Adhesion | 20 ≤ F ≤ 30 N/in | 5 ≤ F ≤ 15 N/in |
| Permanent Adhesion | 20 ≤ F ≤ 35 N/in | 10 ≤ F ≤ 30 N/in |
| Water Contact Angle | >70°, <90° | >80°, <100° |
| TPU | Made in China | Made in China |
Paint Protection Film Roll Features
PPF03
1. Balanced thickness for front‑end kits
8.5mil absorbs impact better than standard films, yet more pliable than 9.5mil.
2. High gloss matches clear coat
No haze on dark colors. Helps you sell premium finish.
3. Plotter‑friendly roll
Works with standard 48″/60″ cutters. Reduces waste and installation time.
4. Moderate tack with repositioning
Slides during wet application. Holds without edge lift on curved bumpers.
5. Heat‑activated self healing
Fine scratches from road debris disappear with hot water or warm air.
6. Clean removal
Adhesive releases without residue. No abrasive removal needed.
PPF06
1. Extra thickness at lower cost
8.5mil improves stone chip resistance over 6.5/7.5mil. Helps you offer “thicker protection” on a budget.
2. Very low initial tack
Slides freely during wet installation. Reduces waste from misalignment on large panels.
3. Heat‑activated scratch repair
Minor abrasions disappear with hot water or warm air. Restores gloss.
4. Hydrophobic surface
Water contact angle 80‑100°. Self‑cleaning effect reduces wash frequency.
5. Residue‑free removal
Peels from factory paint without adhesive left behind.
